 |
For the serious business
minded shop
A complete anodizing system including state of the
art equipment for the professional shop. It includes everything needed to run
the most common Type II anodized aluminum parts in single modularized section
taking up only an area of 4'X10'.
Here is what is supplied in the
package:
1) 1-12 station polypro tank module with compartments sized at 18"X
24"X30 deep". These stations are as follows:
1-cleaner,2-rinse,3-etch,4-rinse,5-deoxidzer,6-rinse,7-anodize,8-spray
rinse,9-rinse,10- seal,11-spray rinse,12-hot rinse.
2) Rectifier -SCR
100amp/24 volt with digital ramp and timer
3) 2 ton chiller with circulation
pump
4) N>TEC aluminum bussing system, heat exchanger, and a sparger
system with low pressure blower
5) Heaters and controllers to maintain
temperatures.
6) 1 all purpose Aluminum rack
7) Instruction manual, test
panels and 4 hrs of phone consulting
The set up is complete and ready for
your maintenance people to connect*. Just bring water and power to the
terminals provided and fill with appropriate solutions defined in the
instruction manual. A Hard coat Type III option is available.
| Total Package Price |
$29,959.00 |
*No waste treatment or
permitting is included. Check your local authorities for permits where
applicable. |
|
|
